Skip to content

This website uses cookies. View our cookies policy.

Cambustion DPG with dual diluter and ash doping system

DPG | Particulate Filter Testing System


Conventional Filter Testing

Traditionally particulate filters have been tested in a variety of ways, combining cold flow bench tests with measurements of backpressure made using an engine and dynamometer to produce soot. The former use artifical soot, with markedly different characteristics to engine generated soot. While widely adopted, engine dynamometer testing requires expensive facilities and staff, and extreme care must be taken to ensure good repeatability and reproducability. The interaction between engine and filter means that evaluation of different filters on a given engine platform may be extremely complex.

The Cambustion DPG Solution

Soot Loading

The dependence of filter backpressure (Δp) on the soot load on a filter is a very important quality control parameter for modern engine control strategies where a backpressure sensor is used in the triggering of filter regenerations. The DPG loads a filter from an empty state and continually monitors Δp and automatically processes the results using loaded and empty weighings of the filter to provide a far better measurement of loading behaviour than is achievable with engine testing.

Regeneration

Control over the DPF inlet conditions allows the DPG to regenerate filters. This can provide a simple means of de-greening filters, regeneration after soot loading tests, or allow more complicated studies such as Soot Mass Limit tests, where the DPG's improved reproducibility and repeatability offer substantial advantages.

Cold Flow Tests

The DPG can also make cold flow tests, and results may be corrected to any set of reference conditions.

Advantages

The DPG has lower infrastructure and operation costs than an engine dynamometer.

Further, the computer control allows the system to operate unmanned for substantial portions of the test- only requiring operator input to weigh or change filters.

The DPG allows customers to study the behaviour of a filter without the corresponding difficulties associated with engine tests, avoiding issues such as passive regeneration due to NOₓ and engine / filter interactions due to backpressure.

The DPG allows the filter to be preheated to the loading temperature and flow conditions, while not producing any soot. The burner settings are then automatically switched to a soot producing mode while maintaining the same filter inlet conditions. This allows the pore filling stage of filtration to be studied in unprecedented detail.

Applications

For a list of Application Notes which offer detailed guidance on common uses of the DPG, click here.

In production quality assurance applications the DPG allows validation of backpressure characteristics, filtration efficiency and regeneration performance.

In an R&D environment it provides economic and repeatable soot loading of filters to support engine and after-treatment development.

Key Application Notes

TitleData TypeDownload FileSizeLast Updated
TitleGasoline Particulate Filter (GPF) testingData TypeApplication noteDownload Filedpg012v01-gpf-testing.pdfSize134.67 KBLast Updated
TitleSub-scale and oxygen control accessoriesData TypeApplication noteDownload Filedpg-010v02.pdfSize929.75 KBLast Updated
TitleDPG RepeatabilityData TypeApplication noteDownload Filedpg-007-dpg-repeatability.pdfSize97.62 KBLast Updated

Need more information? Connect to an expert

Filter Test Housing accessory for bare brick testing

Cambustion offer a Filter Test Housing (FTH) for use with the DPG. This reusable DPF housing allows an uncanned filter to be fitted to the DPG and loaded / regenerated as required. The filter can be quickly removed for weighing and examination, even at elevated temperatures.

This ability is particularly advantageous in both R&D and Quality Control applications, and allows filters to be tested before coating or other final processes take place.

DPF&GPF Testing Service

Cambustion also offer a filter loading / testing service, using the DPG. For more information please see our Engineering Services pages.

Support & downloads

DPG Viewer v4.6

ZIP file containing Excel add-in.

Explore Related Products